Load data for .30 PICRA + .307 | 165gr | Rhino Solid Shank

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.307 \| 165gr \| Rhino Solid Shank
Bullet Weight:	165gr \| 10.7g
Bullet Diameter:	0.307" \| 7.80mm
Bullet Length:	1.120" \| 28.4mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.239" \| 6.1mm
Shank Seated Depth:	0.239" \| 6.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5236_C311
Last updated:	2025-01-01

Load data for 42 loads in caliber .30 PICRA with .307 | 165gr | Rhino Solid Shank bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35186	87%	**91	100%
Accurate 4100	<<locked>>	72%	36187	89%	**93	93%
[Accurate No. 11 FS]*	<<locked>>	80%	35302	87%	**86	85%
Alliant 2400	<<locked>>	68%	34780	86%	**70	94%
Alliant BLUE DOT	<<locked>>	72%	36216	89%	**66	99%
[Hodgdon H110]*	<<locked>>	77%	35795	88%	**16	89%
Hodgdon LilGun	<<locked>>	77%	35752	88%	**39	95%
Hodgdon TrailBoss	<<locked>>	96%	25527	63%	**6	100%
Ramshot Enforcer	<<locked>>	68%	34867	86%	**76	95%
ReloadSwiss RS 14	<<locked>>	96%	25063	62%	**6	100%
ReloadSwiss RS 30	<<locked>>	93%	36056	89%	**45	93%
SNPE Vectan A0	<<locked>>	63%	36085	89%	**99	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	35360	87%	**83	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	35578	88%	**52	100%
[Somchem S265]*	<<locked>>	83%	34737	86%	**50	87%
Vihtavuori 3N38	<<locked>>	68%	35462	87%	**30	100%
Vihtavuori N105	<<locked>>	69%	34258	84%	**20	100%
Vihtavuori N110	<<locked>>	85%	34882	86%	**89	95%
Vihtavuori N32C Tin Star	<<locked>>	78%	35868	88%	**1	100%
Vihtavuori N350	<<locked>>	63%	36361	90%	**61	100%
[Winchester 296]*	<<locked>>	77%	36448	90%	**35	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27079	67%	**83	100%
[Accurate 4100]*	<<locked>>	61%	24497	60%	**99	85%
[Accurate No. 11 FS]*	<<locked>>	74%	28572	70%	**88	81%
Alliant 2400	<<locked>>	61%	27572	68%	**55	91%
Alliant BLUE DOT	<<locked>>	61%	26963	66%	**25	97%
[Hodgdon H110]*	<<locked>>	62%	22568	56%	**86	80%
[Hodgdon LilGun]*	<<locked>>	61%	20117	50%	**63	85%
Hodgdon TrailBoss	<<locked>>	60%	13677	34%	**6	100%
Ramshot Enforcer	<<locked>>	61%	27673	68%	**65	92%
ReloadSwiss RS 14	<<locked>>	62%	13677	34%	**5	100%
[ReloadSwiss RS 30]*	<<locked>>	74%	21176	52%	**73	81%
SNPE Vectan A0	<<locked>>	61%	33663	83%	**76	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14286	35%	**9	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	31212	77%	**99	100%
[Somchem S265]*	<<locked>>	70%	24294	60%	**76	81%
Vihtavuori 3N38	<<locked>>	61%	29399	72%	**42	100%
Vihtavuori N105	<<locked>>	61%	25875	64%	**12	100%
[Vihtavuori N110]*	<<locked>>	61%	16940	42%	**8	82%
Vihtavuori N32C Tin Star	<<locked>>	61%	25063	62%	**6	100%
Vihtavuori N350	<<locked>>	60%	33982	84%	**38	100%
[Winchester 296]*	<<locked>>	69%	27949	69%	**04	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data